VincentJ
August 19, 2019
So here is a bit of a building tip that I often use when epoxying small parts onto something larger such as you see here. Apply the epoxy, then using small spring clamps secure the parts together. These spring clamps will do a good job of applying enough clamping pressure to hold the parts in alignment. If needed you can slide the parts if they move out of alignment. I will keep the spring clamps on for about 10 or 15 minutes. I'll usually check my mixing cup and look at the unused epoxy l
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!